Skip to main content

Voice Control and Working with Bixby

The new Bixby supports SmartThings device integrations.
{% textbox info NOTE %}
Currently available with Galaxy Note 9 and SmartThings app 1.7.19 or later.
{% endtextbox %}
The following sample use cases demonstrate the Bixby experience:
* If you connect your air conditioner to SmartThings Cloud, you can control the air conditioner through speech by saying "Raise the temperature of the air conditioner".
* If you connect your washer machine to SmartThings Cloud, you can also control it through speech by saying "Start washing in the washer" and when you had made a TV, you can speak "TV Channel up".
* You may also control your television through Bixby by saying "Change the TV channel up" in order to navigate to the next available TV channel.
It is simple to integrate the Bixby AI assistant with your SmartThings devices.
1. Self-publish your device and connect the device to the SmartThings app using the Developer Mode.
2. Bixby automatically detects your devices and understands the SmartThings capabilities.
3. You can say, "Hi Bixby, turn on the light". You can also press the Bixby button and say, "Turn on the light".
The following table lists examples of IoT devices, features, and capabilities built into the New Bixby. Capabilities are not restricted by device.
## Air conditioner
### Power on
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn on the [device name]/[device type] </td>
<td>"Turn on the air conditioner"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
### Power off
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn off the [device name]/[device type] </td>
<td>"Turn off the air conditioner"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
### Increase temperature
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Raise the temperature of the [device name]/[device type]</td>
<td>"Raise the temperature of the air conditioner"</td>
<td>[Thermostat Cooling Setpoint](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Cooling-Setpoint)</td>
</tr>
</table>
### Decrease temperature
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Lower the temperature of the [device name]/[device type]</td>
<td>"Lower the temperature of the air conditioner"</td>
<td>[Thermostat Cooling Setpoint](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Cooling-Setpoint)</td>
</tr>
</table>
### Set mode
|Bixy Commands | Examples | capabilities|
---------------|----------|-------------|
Change the mode of the [device name]/[device type] to [mode]|"Change the mode of the air conditioner to dehumidification", "Change the air conditioner mode to auto"|Air Conditioner Mode|
- **Values**: `dehumidification/auto/cooling/heating`
### Set fan speed
|Bixby Commands|Examples|Capabilities|
|--- |--- |--- |
|Change the mode of the [device name]/[device type] to [mode]|"Change the fan speed for the air conditioner to turbo", "Change the fan speed of the air conditioner to low", "Change the fan speed for the air conditioner to medium", "Change the fan speed for the air conditioner to high"|Fan Speed|
- **Values**: `turbo/low/medium/high`
### Check status
|Bixby Commands|Examples|Capabilities|
|--- |--- |--- |
|Check the humidity information in the [device name]/[device type]|"Check the humidity in the air conditioner"|[Relative Humidity Measurement](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Relative-Humidity-Measurement)|
|Check the temperature setting of the [device name]/[device type]|"Check the temperature setting of the air conditioner"|[Thermostat Cooling Setpoint](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Cooling-Setpoint)|
|Check the indoor temperature of the [device name]/[device type]|"Check the indoor temperature of the air conditioner"|[Thermostat Cooling Setpoint](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Cooling-Setpoint), [Temperature Measurement](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Temperature-Measurement)|
|Check the fan speed of the [device name]/[device type]|"Check the fan speed of the air conditioner"|[Fan Speed](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Fan-Speed)|
|Check the mode of the [device name]/[device type]|"Check the mode of the air conditioner"|[Thermostat Operating State](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Operating-State)|
## Air Purifier
### Power on
|Bixby Commands|Examples|Capabilities|
|--- |--- |--- |
|Turn on the [device name]/[device type]|"Turn on the air purifier", "Turn on the living room air purifier", "Turn on the air purifier in home", "Turn on the living room air purifier in home"|[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)|
### Power off
|Bixby Commands|Examples|Capabilities|
|--- |--- |--- |
|Turn off the [device name]/[device type]|"Turn off the air purifier", "Turn off the living room air purifier", "Turn off the air purifier in home", "Turn off the living room air purifier in home"|[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)|
### Set fan speed
|Bixby Commands|Examples|Capabilities|
|--- |--- |--- |
|Change the fan speed of [device name]/[device type] to [fan speed]|"Change the fan speed of air purifier to turbo","Change the fan speed of air purifier to low","Change the fan speed of air purifier to medium","Change the fan speed of air purifier to high"|[Fan Speed](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Fan-Speed)|
- **Values**: `turbo/low/medium/high`
### Check status
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Check the indoor air freshness in the [device name]/[device type] </td>
<td>"Check the indoor air freshness in the Air Purifier"</td>
<td>[Carbon Monoxide Detector](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Carbon-Monoxide-Detector)</td>
</tr>
<tr>
<td>Check the filter usage time for the [device name]/[device type] </td>
<td>"Check the filter usage time for the air purifier"</td>
<td>[Filter Status](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Filter-Status)</td>
</tr>
</table>
- **Values**: `clear/detected/tested`
## Washer
### Start device
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Start [device name]/[device type]</td>
<td>"Start washing in the washer"</td>
<td rowspan=2>[Washer Operating State](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Washer-Operating-State)</td>
</tr>
<tr>
<td>Start the washing course to the spin-dry in the [device name]/[device type]</td>
<td>"Start the washing course to the spin-dry in the washer"</td>
</tr>
</table>
### Pause device
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Pause the [device name]/[device type] cycle</td>
<td>"Pause the cycle in the washer"</td>
<td>[Washer Operating State](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Washer-Operating-State)</td>
</tr>
</table>
### Cancel device
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Cancel the [device name]/[device type] cycle</td>
<td>"Cancel the cycle in the washer"</td>
<td>[Washer Operating State](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Washer-Operating-State)</td>
</tr>
</table>
### Check status
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Check the [device name]/[device type] remaining time</td>
<td>"Check the remaining time of the laundry in the washer"</td>
<td>[Washer Operating State](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Washer-Operating-State)</td>
</tr>
<tr>
<td>Tell me supported courses of [device name]/[device type]</td>
<td>"Tell me supported courses of washer"</td>
<td>[Washer Mode](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Washer-Mode)</td>
</tr>
<tr>
<td>What stage is the [device name]/[device type] on</td>
<td>"Check the remaining time of the laundry in the washer"</td>
<td>[Washer Operating State](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Washer-Operating-State)</td>
</tr>
</table>
## Robot vacuum cleaner
### Start vacuum
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Start [vacuum mode] for [device name]/[device type]</td>
<td>"Start auto cleaning for the robot cleaner"</td>
<td>[Robot Cleaner Cleaning Mode](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Robot-Cleaner-Cleaning-Mode)</td>
</tr>
</table>
- **Values**: `auto/part/repeat/manual/stop/map`
### Pause vacuum
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Pause the [device name]/[device type]</td>
<td>"Pause the robot cleaner"</td>
<td>[Robot Cleaner Cleaning Mode](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Robot-Cleaner-Cleaning-Mode)</td>
</tr>
</table>
### Set value
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Set the suction power to [power level] for the [device name]/[device type]</td>
<td>"Set the suction power to maximum for the robot cleaner"</td>
<td>[Robot Cleaner Turbo Mode](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Robot-Cleaner-Turbo-Mode)</td>
</tr>
</table>
- **Values**: `on/off/silence`
### Check status
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Check the status of [device name]/[device type]'s battery.</td>
<td>"Check the status of the robot cleaner’s battery"</td>
<td rowspan="2">[Battery](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Battery)</td>
</tr>
<tr>
<td>Check the battery of [device name]/[device type].</td>
<td>"Check the battery of the robot cleaner"</td>
</tr>
</table>
### Charge the battery
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Charge the [device name]/[device type]</td>
<td>"Begin recharging Robot cleaner"</td>
<td>[Battery](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Battery)</td>
</tr>
</table>
## Speaker
### Power on
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn on the [device name]/[device type] </td>
<td>"Turn on the speaker"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
### Power off
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn off the [device name]/[device type] </td>
<td>"Turn off the speaker"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
### Increase volume
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Raise the [device name]/[device type] volume</td>
<td>"Raise the speaker volume"</td>
<td>[Audio Volume](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Audio-Volume)</td>
</tr>
</table>
### Decrease volume
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Lower the [device name]/[device type] volume</td>
<td>"Lower the speaker volume"</td>
<td>[Audio Volume](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Audio-Volume)</td>
</tr>
</table>
### Set volume
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Set [device name]/[device type] volume on [volume]</td>
<td>"Set speaker volume to 20"</td>
<td>[Audio Volume](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Audio-Volume)</td>
</tr>
</table>
### Notify information
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>What level is the [device name]/[device type] volume at?</td>
<td>"What level is the speaker volume at?"</td>
<td>[Audio Volume](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Audio-Volume)</td>
</tr>
</table>
### Play
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Play the [device name]/[device type]</td>
<td>"Play the speaker"</td>
<td>[Media Playback](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Media-Playback)</td>
</tr>
</table>
### Play previous/next
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Play the previous/next song on the [device name]/[device type]</td>
<td>"Play previous song on the speaker"</br>
"Play next song on the speaker"</td>
<td>Media Track Control</td>
</tr>
</table>
### Pause
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Pause the [device name]/[device type]</td>
<td>"Pause the speaker"</td>
<td>[Media Playback](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Media-Playback)</td>
</tr>
</table>
### Stop
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Stop the [device name]/[device type]</td>
<td>"Stop the speaker"</td>
<td>[Media Playback](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Media-Playback)</td>
</tr>
</table>
## TV
### Power on
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn on the [device name]/[device type] </td>
<td>"Turn on the TV"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
### Power off
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn off the [device name]/[device type]</td>
<td>"Turn off the TV"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
### Change TV channel
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>[device name]/[device type] channel up</td>
<td>"TV channel up"</td>
<td rowspan="2">[Tv Channel](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Tv-Channel)</td>
</tr>
<tr>
<td>[device name]/[device type] channel down</td>
<td>"TV channel down"</td>
</tr>
</table>
### Change TV volume
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Set [device name]/[device type] volume to [volume]</td>
<td>"Set TV volume to 15"</td>
<td rowspan="3">[Audio Volume](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Audio-Volume)</td>
</tr>
<tr>
<td>Turn up the [device name]/[device type] volume</td>
<td>"Turn up the TV volume"</td>
</tr>
<tr>
<td>Turn down the [device name]/[device type] volume</td>
<td>"Turn down the TV volume"</td>
</tr>
</table>
### Change TV backlight
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Brighten the [device name]/[device type] backlight</td>
<td>"Brighten the TV backlight"</td>
<td rowspan="2">[Switch Level](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch-Level)</td>
</tr>
<tr>
<td>Dim the [device name]/[device type] backlight</td>
<td>"Dim the TV backlight"</td>
</tr>
</table>
### Change HDMI
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Change HDMI1 source in [device name]/[device type]</td>
<td>"Change HDMI1 source in TV"</td>
<td>[Media Input Source](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Media-Input-Source)</td>
</tr>
</table>
### Check status
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Check the [device name]/[device type] volume</td>
<td>"What level is the TV volume at"</td>
<td>[Audio Volume](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Audio-Volume)</td>
</tr>
<tr>
<td>Check the [device name]/[device type] channel information</td>
<td>"What level is the TV volume at?"</td>
<td>[Tv Channel](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Tv-Channel)</td>
</tr>
</table>
### Play
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Play the [device name]/[device type]</td>
<td>"Play the TV"</td>
<td>[Media Playback](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Media-Playback)</td>
</tr>
</table>
### Pause
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Pause the [device name]/[device type]</td>
<td>"Pause the TV"</td>
<td>[Media Playback](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Media-Playback)</td>
</tr>
</table>
### Stop
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Stop the [device name]/[device type]</td>
<td>"Stop the TV"</td>
<td>[Media Playback](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Media-Playback)</td>
</tr>
</table>
## Door lock
### Notify information
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Check the lock status of the [device name]/[device type]</td>
<td>"Check the lock status of the door"</td>
<td>[Lock](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Lock)</td>
</tr>
</table>
### Lock the door
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Lock the [device name]/[device type]</td>
<td>"Lock the door"</td>
<td>[Lock](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Lock)</td>
</tr>
</table>
## Light
### Turn on
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn on the [device name]/[device type] </td>
<td>"Turn on the light"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
### Turn off
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn off the [device name]/[device type] </td>
<td>"Turn off the light"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
### Set light value
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Change the [device name]/[device type] dimming level to [light value]</td>
<td>"Change the light bulb dimming level to 25"</td>
<td rowspan="2">[Switch Level](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch-Level)</td>
</tr>
<tr>
<td>Maximize/Minimize the brightness of the [device name]/[device type]</td>
<td>"Maximize the brightness of the light"</br>
"Minimize the brightness of the light"</td>
</tr>
</table>
### Dim / Brighten by a certain percentage
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Dim the [device name]/[device type] by 50%</td>
<td>"Dim the light name by 50%"</td>
<td rowspan="2">[Switch Level](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch-Level)</td>
</tr>
<tr>
<td>Brighten the [device name]/[device type] by 50%</td>
<td>"Brighten the light by 50%"</td>
</tr>
</table>
### Change the color
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Change the [device name]/[device type] color to [color]</td>
<td>"Change the light color to Blue"</td>
<td>[Color Control](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Color-Control)</td>
</tr>
</table>
### Check status
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Check the dimming level of the [device name]/[device type]</td>
<td>"Check the dimming level of the light bulb"</td>
<td>[Switch Level](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch-Level)</td>
</tr>
</table>
### Turn on all light
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn on all lights in [location]</td>
<td>"Turn on all lights in home"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
### Turn off all light
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn off all lights in [location]</td>
<td>"Turn off all lights in home"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
## Motion sensor
### Check status
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Check the temperature of the [device name]/[device type]</td>
<td>"Check the temperature of the motion sensor"</td>
<td>[Temperature Measurement](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Temperature-Measurement)</td>
</tr>
<tr>
<td>Check the status of the [device name]/[device type]'s battery</td>
<td>"Check the status of the motion sensor's battery"</td>
<td>[Battery](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Battery)</td>
</tr>
</table>
## Multi-functional sensor
### Check status
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Check the humidity of the [device name]/[device type]</td>
<td>"Check the humidity of the multi-functional sensor"</td>
<td>[Relative Humidity Measurement](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Relative-Humidity-Measurement)</td>
</tr>
<tr>
<td>Check the status of the [device name]/[device type]'s contact sensor</td>
<td>"Check the status of the multi-functional sensor's contact sensor"</td>
<td>[Contact Sensor](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Contact-Sensor)</td>
</tr>
<tr>
<td>Check the acceleration of the [device name]/[device type]</td>
<td>"Check the acceleration of the multi-functional sensor"</td>
<td>[Acceleration Sensor](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Acceleration-Sensor)</td>
</tr>
<tr>
<td>Check the temperature of the [device name]/[device type]</td>
<td>"Check the temperature of the multi-functional sensor"</td>
<td>[Temperature Measurement](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Temperature-Measurement)</td>
</tr>
<tr>
<td>Check the status of the [device name]/[device type]'s battery</td>
<td>"Check the status of the multi-functional sensor's battery"</td>
<td>[Battery](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Battery)</td>
</tr>
</table>
## Open and close sensor
### Check status
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Check the status of the [device name]/[device type]'s contact sensor</td>
<td>"Check the status of the open and close sensor's contact sensor"</td>
<td>[Contact Sensor](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Contact-Sensor)</td>
</tr>
<tr>
<td>Check the status of the [device name]/[device type]'s battery</td>
<td>"Check the status of the open and close sensor's battery"</td>
<td>[Battery](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Battery)</td>
</tr>
</table>
## Outlet
### Power on
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn on the [device name]/[device type] </td>
<td>"Turn on the outlet"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
### Power off
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn off the [device name]/[device type] </td>
<td>"Turn off the outlet"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
### Set level
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Change the level of the [device name]/[device type] to [level]</td>
<td>"Change the level of the outlet to 25"</td>
<td>[Switch Level](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch-Level)</td>
</tr>
</table>
### Check status
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Check the energy consumption of the [device name]/[device type]</td>
<td>"Check the energy consumption of the outlet"</td>
<td>[Energy Meter](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Energy-Meter)</td>
</tr>
<tr>
<td>Check the status of the [device name]/[device type]</td>
<td>"Check the status of the outlet"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
## Switch & Dimmer
### Power on
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn on the [device name]/[device type] </td>
<td>"Turn on the switch"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
### Power off
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn off the [device name]/[device type] </td>
<td>"Turn off the switch"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
### Set level
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Change the level of the [device name]/[device type] to [level]</td>
<td>"Change the dimmer switch level to 25"</td>
<td>[Switch Level](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch-Level)</td>
</tr>
</table>
### Check status
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Change the level of the [device name]/[device type]</td>
<td>"Check the level of the switch"</td>
<td>[Switch Level](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch-Level)</td>
</tr>
</table>
## Thermostat
### Power off
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn off the [device name]/[device type]</td>
<td>"Turn off the thermostat"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
### Increase temperature
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td rowspan = "3">Raise the [mode] of the [device name]/[device type]</td>
<td>"Raise the temperature of the thermostat"</td>
<td>[Thermostat Setpoint](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Setpoint)</td>
</tr>
<tr>
<td>"Raise the heating of the thermostat"</td>
<td>[Thermostat Heating Setpoint](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Heating-Setpoint)</td>
</tr>
<tr>
<td>"Raise the cooling of the thermostat"</td>
<td>[Thermostat Cooling Setpoint](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Cooling-Setpoint)</td>
</tr>
</table>
### Decrease temperature
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td rowspan = "3">Lower the [mode] of the [device name]/[device type]</td>
<td>"Lower the temperature of the thermostat"</td>
<td>[Thermostat Setpoint](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Setpoint)</td>
</tr>
<tr>
<td>"Lower the heating of the thermostat"</td>
<td>[Thermostat Heating Setpoint](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Heating-Setpoint)</td>
</tr>
<tr>
<td>"Lower the cooling of the thermostat"</td>
<td>[Thermostat Cooling Setpoint](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Cooling-Setpoint)</td>
</tr>
</table>
### Change the temperature
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Change the temperature of the [device name]/[device type] to [degree]</td>
<td>"Change the temperature of the thermostat to 20"</td>
<td>[Thermostat Setpoint](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Setpoint)</td>
</tr>
<tr>
<td>Set the [device name]/[device type] heating to [degree]</td>
<td>"Set the thermostat heating to 29 degrees"</td>
<td>[Thermostat Heating Setpoint](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Heating-Setpoint)</td>
</tr>
<tr>
<td>Set the [device name]/[device type] cooling to [degree]</td>
<td>"Set the thermostat cooling to 21 degrees"</td>
<td>[Thermostat Cooling Setpoint](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Cooling-Setpoint)</td>
</tr>
</table>
### Change mode
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn [device name]/[device type] to [mode]</td>
<td>"Turn thermostat to heating mode"</td>
<td>[Thermostat Mode](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Mode)</td>
</tr>
</table>
### Set fan mode
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Change the fan mode of the [device name]/[device type] to [fan mode]</td>
<td>"Change the fan mode of the thermostat to Auto"</td>
<td>[Thermostat Fan Mode](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Fan-Mode)</td>
</tr>
</table>
- **Values**: `auto/circulate/followschedule/on`
### Check status
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Check the [device name]/[device type] temperature</td>
<td>"Check the current thermostat temperature"</td>
<td>[Temperature Measurement](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Temperature-Measurement)</td>
</tr>
<tr>
<td>Check the [device name]/[device type] temperature for cooling</td>
<td>"Check the thermostat temperature for cooling"</td>
<td>[Thermostat Cooling Setpoint](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Thermostat-Cooling-Setpoint)</td>
</tr>
<tr>
<td>Check the humidity of [device name]/[device type]</td>
<td>"Check thermostat’s current humidity"</td>
<td>[Relative Humidity Measurement](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Relative-Humidity-Measurement)</td>
</tr>
<tr>
<td>Check the battery of [device name]/[device type]</td>
<td>"Check the status of the thermostat’s battery"</td>
<td>[Battery](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Battery)</td>
</tr>
</table>
## Valve
### Open the valve
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Open the [device name]/[device type]</td>
<td>"Open the valve"</td>
<td>[Valve](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Valve)</td>
</tr>
</table>
### Close the valve
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Close the [device name]/[device type]</td>
<td>"Close the valve"</td>
<td>[Valve](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Valve)</td>
</tr>
</table>
### Check status
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Check the status of the [device name]/[device type]</td>
<td>"Check the status of the valve"</td>
<td>[Valve](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Valve)</td>
</tr>
</table>
## Vent
### Turn on
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn on the [device name]/[device type] </td>
<td>"Turn on the vent switch"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
### Turn off
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Turn off the [device name]/[device type]</td>
<td>"Turn off the vent switch"</td>
<td>[Switch](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Switch)</td>
</tr>
</table>
### Set level
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Change the level of the [device name]/[device type] to [level]</td>
<td>"Change the Vent switch level to 25"</td>
<td>[Fan Speed](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Fan-Speed)</td>
</tr>
</table>
- **Values**: `auto/low/medium/high`
### Check status
<table>
<tr>
<th width="40%">Bixby Commands</th>
<th width="40%">Examples</th>
<th width="20%">Capabilities</th>
</tr>
<tr>
<td>Check the temperature of the [device name]/[device type]</td>
<td>"What is the temperature at the vent?"</td>
<td>[Temperature Measurement](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Temperature-Measurement)</td>
</tr>
<tr>
<td>Check the status of the [device name]/[device type] battery</td>
<td>"What is the status of the vent’s battery?"</td>
<td>[Battery](https://smartthings.developer.samsung.com/docs/api-ref/capabilities.html#Battery)</td>
</tr>
</table>
To learn more about the Bixby Developer Program, [click here](https://bixbydevelopers.com/).```